So I went to home depot and they had 2" tee but no 2" endcaps or anything like that. So I wound up getting a 1 1/2 Tee. I found a end cap and a reducer for it.
Right now I am waiting for the Hot GLue piston mold to dry. I am using the actual tee for the mold.
Is there anything wrong with using a 1 1/2 tee?
its NSF PW
Piston Valve in progress
-
CannonCreator
- Specialist 3
- Posts: 314
- Joined: Sun Aug 12, 2007 12:59 pm
- Location: Moorpark, CA
- Contact:
Last edited by CannonCreator on Sat Sep 01, 2007 8:33 pm, edited 1 time in total.
Spudding Is dangerous, I learned the hard way:
http://www.spudfiles.com/forums/my-eye- ... 15301.html
Guns. As They may Claim lives, they are lives. Our lives.
When Life gives you lemons, through them at somone.
Live, Breathe, Eat, Paintball
http://www.spudfiles.com/forums/my-eye- ... 15301.html
Guns. As They may Claim lives, they are lives. Our lives.
When Life gives you lemons, through them at somone.
Live, Breathe, Eat, Paintball
a plug..
Marvin the Martian: Where's the kaboom? There was supposed to be an earth-shattering kaboom!
Marvin the Martian: The Earth? Oh, the Earth will be gone in just a few seconds.
Marvin the Martian: The Earth? Oh, the Earth will be gone in just a few seconds.
PCGUY wrote:Congrats, your the first donating member I have had to ban.
-
CannonCreator
- Specialist 3
- Posts: 314
- Joined: Sun Aug 12, 2007 12:59 pm
- Location: Moorpark, CA
- Contact:
Will those go directly into a 2" tee?
or do I need to put 2" pvc piping in the Tee then put in the plug?
or do I need to put 2" pvc piping in the Tee then put in the plug?
Spudding Is dangerous, I learned the hard way:
http://www.spudfiles.com/forums/my-eye- ... 15301.html
Guns. As They may Claim lives, they are lives. Our lives.
When Life gives you lemons, through them at somone.
Live, Breathe, Eat, Paintball
http://www.spudfiles.com/forums/my-eye- ... 15301.html
Guns. As They may Claim lives, they are lives. Our lives.
When Life gives you lemons, through them at somone.
Live, Breathe, Eat, Paintball
-
iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
Yes, they are spigot fittings. Unless you want to tap the fill/exhaust port, use a threaded bushing instead.
Summer Projects:
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
-
potatoflinger
- Sergeant 2
- Posts: 1136
- Joined: Thu Nov 02, 2006 3:26 pm
- Location: Maryland
Make sure that the 2'' tee is pressure rated!!! Most of the fittings that home depot sells are not pressure rated.
It's hard to soar with eagles when you're working with turkeys.
i usually use a female adaptor and a threaded plug that way i can take the piston out if it has problems.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 45 Replies
- 10889 Views
-
Last post by Gun Freak
-
- 1 Replies
- 1167 Views
-
Last post by jackssmirkingrevenge
-
- 72 Replies
- 18166 Views
-
Last post by Technician1002
-
- 46 Replies
- 16614 Views
-
Last post by jhalek90
-
- 16 Replies
- 14856 Views
-
Last post by Brian the brain
