Superfast valve idea

[Gunner]

Just came my mind, and I think that valve could be pretty fast if it works.[/img]

[jackssmirkingrevenge]

Basically a piston valve where the pneumatic pilot is replaced by a mechanical latch, it should work brilliantly if you can make the latch strong enough. I made something similar (but in coaxial form) with this launcher.

[Hotwired]

Probably would be. Problem is it's focusing a large piston face of pressure on a small sear. Bit like a springer air gun.

If you can machine up a good sear mechanism it'd work

[jackssmirkingrevenge]

Probably would be. Problem is it's focusing a large piston face of pressure on a small sear. Bit like a springer air gun.

Good analogy, I had made my components out of metal reinforced epoxy (what else ) and they served me well, but the piston was less than 3/4" diameter - for larger launchers I would stick to a conventionally piloted piston, and concentrate of having a small pilot volume and high flow pilot to get good performance.

[iknowmy3tables]

its been done before, I've been thinking about doing this for awhile because I like the speed

how might you plug one of these into ggdt, do you think maybe a pilot equal to the piston diameter

[Hawkeye]

The trigger is basically just a flush handle for a urinal. You can probably buy one.

[iknowmy3tables]

The trigger is basically just a flush handle for a urinal. You can probably buy one.

the actual trigger or the release mechanism, I don't think anyone would have trouble making a handle but a flush handle and the release mechanism are completely different, a flush handle is just a lever the sides on the inside and outside of the toilet tank, to pull a the flapper I find nothing useful in a flash handle for this

[Hawkeye]

Not a flush handle from a toilet, a flush handle from a urinal. They do function similar to the diagram, only holding back water instead of air.

[mark.f]

Another idea is to use some sort of ball-bearing release mechanism around the circumference of the piston. Allows more distribution of the force on the piston, as well as being easy to actuate as well with a simple lock collar.

[jackssmirkingrevenge]

Another idea is to use some sort of ball-bearing release mechanism around the circumference of the piston.

*cue link to clide's mini-pump*

but I can't be bothered, it's the holidays and I'm sick at home

[mark.f]

I got it.

Long link.

I, too, am tired. See you guys tomorrow.

[iknowmy3tables]

Another idea is to use some sort of ball-bearing release mechanism around the circumference of the piston. Allows more distribution of the force on the piston, as well as being easy to actuate as well with a simple lock collar.

just like a quick conect eh?
this suddenly reminds me of an old idea
edit: how about this

[jackssmirkingrevenge]

if you could make it, looks good

[Carlman]

hmm looks complicated lol, could make for a fast bb gun...