Need advice for my vortex block

[Gun Freak]

I'm on my third block now, the first cracked in half when cutting the hole, second one I butchered the inside. The third now, I made a little mistake drilling. When I was making the barrel hole, the drill always went a little too far (it pulls itself in the hole) and I made thses little bumps in the inside. I am wondering if this is common on vortex blocks and if it will decrease performance enough so that I should fill them in to fix it? Thanks, here are some pics:



Oh and the barrel goes halfway into the vortex hole, is that right or should I move it back some?

[clemsonguy1125]

Move the barrel back, looks good

[Lockednloaded]

the barrel should definitely be moved back, the BBs need to spin around the vortex, in your design you are assuming that the BBs will go straight into the barrel, but IIRC, the BBs are meant to spin around the vortex. I would also make a shroud if I were you so that you could use a spring.

[Gun Freak]

Yeah I will make a shroud soon, I want to get the internal stuff right before I make it unaccessible. So move the barrel back, but are the little holes worth filling with like epoxy or something?

[jhalek90]

Dont move the barrel back at all.

Simply leave it where it is, and sand it flush.

That way, your barrel takes the shape of the pcv ring.

That is what i did on mine, and it works very well.

[Gun Freak]

Cool that sounds like a good idea. Thanks!
Still nobody has answered my original question though,
Should I fill in the holes or not?

[clemsonguy1125]

Yes and aNd them flush

[Gun Freak]

Ok I'm gonna do what jhalek90 sugested.

[kydavies]

might i suggest you get a sharpe and colour the part of the barrel that will be removed while keeping the barrel in that position and using the pvc to get the perfect shape. then use a dremel to cut/sand away everything that is coloured with the sharpe.

[Gun Freak]

It's all good, I marked it with a sharpy and then took it out and grinded it to the right shape with my bench grinder.
Here's a couple pictures, I'm out of bb's so I couldn't really test fire it a lot, but I picked a couple up and it fires them.

[clemsonguy1125]

Looks good, your barrel still needs to be sanded down a little though, for cheap bbs check walmart I found them on sale 10000 for like 11 bucks

[Gun Freak]

Actually the barrel is not going into the vortex at all, the picture just looks like it. I do buy the ones at walmart, 10k for like 13 dollars I think. But my friend has some and he's coming over this week so I'll ask him to bring some.

[Crna Legija]

you should fill the dints you made with epoxy then sand it smoth

[Gun Freak]

Already did that, you can't really see it in the photos.

[jhalek90]

Gun freak, good job with the barrel That is how i have always done mine.

For a relatively new member (i know you have 10x as many post as me... lol, but i haven't seen you on here for very long) you are very very impressive.

I like your work. Keep it up :thumbright:

Teaser: I hope to release my new weapon of insignificant destruction soon.