dump valves
-
unisonmind
- Specialist
- Posts: 118
- Joined: Wed Jan 24, 2007 9:25 pm
so im lookin for a 300+psi dump valve i would like it to be metal but if not its cool but i cant find one online only the rain bird ones that are like 150 psi max so if you know where i cant get one or if there is even one out there
What?
You surely mean a solenoid valve.
You can get ones for 300psi pressure and they are generally metal and very definitely expensive. Not very findable mind you.
Hey I found one: http://www.patriot-supply.com/products/ ... .cfm/48499
Bloody expensive. I'm sure there are cheaper ones out there.
Found another, cheaper one:
http://www.anderson-bolds.com/Merchant2 ... y_Code=PV2
Doubt you'll find a new one for much under $150.
You surely mean a solenoid valve.
You can get ones for 300psi pressure and they are generally metal and very definitely expensive. Not very findable mind you.
Hey I found one: http://www.patriot-supply.com/products/ ... .cfm/48499
Bloody expensive. I'm sure there are cheaper ones out there.
Found another, cheaper one:
http://www.anderson-bolds.com/Merchant2 ... y_Code=PV2
Doubt you'll find a new one for much under $150.
Last edited by Hotwired on Thu Jan 25, 2007 2:09 pm, edited 1 time in total.
Since you mentioned not wanting to have to do much in the way of modding you might want to take a look at quick exhaust valves (QEV's).
Technobots declares them to be useable to 300psi and they use them in combat robots.
http://www.technobots.co.uk/index.html? ... =d120.html
Technobots declares them to be useable to 300psi and they use them in combat robots.
http://www.technobots.co.uk/index.html? ... =d120.html
